Plan the screens before the walls close
Screen locations, mounting backing, cable paths, power, and equipment space, coordinated with your architect and contractor while the walls are still open.
For owners, architects, designers, and general contractors building or remodeling restaurants, bars, hotels, clinics, offices, casinos, and senior living communities.
The easiest time to run a cable is before the drywall
Every venue that adds screens late discovers the same thing: the wall is finished, the ceiling is closed, and the only way to a clean installation is to open something up. Pre-wiring is the opposite experience. When screen locations, backing, conduit, power, and equipment space are decided while the walls are still open, the installation is quick, the cabling is hidden, and the TVs sit exactly where the design intended. We work with your architect and contractor to settle those details on paper first.
Eight things worth settling before finishes go in
None of this is exotic. It is simply easier, cleaner, and less disruptive when it happens during the build.
Screen locations and heights
Where every screen goes, how high, and from which seats it needs to be visible. A screen schedule drawn up early prevents the lone TV that nobody can see from the booth by the window.
Mounting backing and blocking
Solid support inside the wall or ceiling for every mount, sized for the screen and the type of mount. Adding it later means opening the wall; adding it during framing takes minutes.
Cable paths and conduit
Routes from each screen back to its equipment, with conduit or pull strings where the structure allows, and room to add a cable later without starting over.
Power at the screen
Outlets behind or above each display, placed so no cord hangs down the wall, and coordinated with the electrician’s plan.
Equipment closet or rack space
A ventilated, powered, accessible place for receivers and distribution gear, close enough to every run and easy for a technician to reach.
Dish placement and roof access
A clear line of sight to the satellites, typically toward the southern sky in the United States, with a mounting location and cable path agreed with the roofer so the roof is penetrated once and sealed properly.
Network and audio provisions
Network drops where equipment needs an internet connection, and cable paths for the music and audio zones your design calls for.
Labeling and documentation
Every run labeled at both ends and recorded, so the next technician, tenant, or remodel starts with a map rather than a mystery.
Different buildings, different pre-wire priorities
What matters most depends on what you are building.
Where we fit in the construction schedule
A pre-wire plan follows the same phases as the building. Here is what we do, and what we ask of you, at each stage.
- 01
Design and permitting
Share floor plans, elevations, and the reflected ceiling plan. We help you mark screen locations, equipment space, and the dish location, and flag anything the design makes difficult.
- 02
Rough-in, before drywall
Blocking, conduit, power, and cable paths go in while the walls are open. We provide a clear scope for the contractor and walk the site where useful.
- 03
Finishes
Painters and ceiling crews work around the planned locations. We confirm nothing has been covered, moved, or blocked before the walls are closed.
- 04
Installation and commissioning
Our technicians mount the screens, connect the equipment, point the dish, and verify every screen and zone against the plan.
- 05
Opening and support
We stay on call for opening week, and our support team becomes your one number to call for programming changes and service afterward.
A consultative path from plans to opening day
We work with whoever runs your project: an owner, a design team, or a general contractor.
- 01
Share the plans
Send the drawings and schedule, or walk us through the site. We learn the space, the audience, and the opening date.
- 02
Design the system
We map screens, zones, equipment, and programming by viewing type, and deliver a pre-wire scope your contractor can price and build.
- 03
Coordinate the rough-in
We answer your contractor’s questions and check the work before it is covered, so there are no surprises behind the wall.
- 04
Install and support
Professional installation, programming set up for your room, and one accountable team afterward, anywhere in the 50 states.
Helpful to have on the first call
- Floor plans and, if available, elevations and the reflected ceiling plan.
- The construction schedule, especially the dates for framing, drywall, and opening.
- Who is the general contractor, electrician, and roofer for the project.
- The rooms that need screens and the kind of viewing in each: public, business, or private.
- Any brand, landlord, or code requirements that affect mounting, cabling, or the roof.
Prefer to talk it through? Call New Sales at 888-688-1699.
New Construction & Renovation TV Pre-Wiring, answered
What owners and managers ask most before they request a quote.
Pre-wiring is planning and installing the infrastructure for screens before the walls and ceilings are finished: mounting backing, conduit or cable paths, power at each display, equipment space, and the dish location. It lets the final installation be fast and clean, with cables hidden and screens exactly where the design put them.
Either, and ideally both. Owners decide what the space needs to do. Architects, designers, and general contractors decide how the building accommodates it. We work with whoever leads the project and give your contractor a clear scope they can price and build.
As early as the plans are firm enough to show where the screens go, and no later than the start of framing, when blocking and cable paths are easy to add. Involving a provider once the walls are finished is possible but usually means more disruption and more visible wiring.
Yes. Renovations in finished buildings call for different techniques, such as surface raceway, ceiling runs, and existing chases. Our older-building and brick-wall guides cover the options, and we plan around the building rather than demanding demolition.
Yes. For chains and growing brands, we help define a standard pre-wire package that every new build follows, then support each opening. See our multi-location and national accounts solution and our franchise prototype layout guide.
No. Planning the infrastructure is separate from choosing programming. A tailored custom quote for programming follows once you know the rooms and the viewing types. We never quote a fixed shelf price because lineups and needs vary.
Keep reading, go deeper
Guides, services, and answers that pair with this page.
Get the screens into the plan
Share your plans with a programming specialist and we will help you settle screen locations, cable paths, and equipment space before the walls close. No pressure, no obligation.





